TM 5-3810-306-34
d. Install washer (7) and new preformed packing
6. USING
PROPER
TORQUE
WRENCH,
(6) on relief valve cartridge (8). Install relief
valve (5) into inlet section (4).
TORQUE TIE BOLTS (2) TO 350 IN-LBS (39
Nm) (A-20 VALVE) AND 400 IN-LBS (44 Nm)
4.
POSITION SECTIONS TOGETHER WITH NEW
(A-35 VALVE).
PREFORMED PACKINGS (16) AND (17).
7. APPLY LOCTITE #545 TO THREADS OF
SECURE ASSEMBLY WITH TIE BOLTS (2).
FITTINGS AND INSTALL AS REQUIRED.
NOTE
8. INSTALL PLUG (20) AND TIGHTEN UNTIL
BOTTOMED.
Do not torque tie bolts at this time.
9. ACTUATE SPOOL
TO
ENSURE
FREE
5.
INSTALL CHECK VALVES (32).
MOVEMENT.
CAUTION
10. INSTALL CONTROL VALVE. (REFER TO TM
5-3810-306-20.)
Ensure that all sections are aligned
prior to applying torque.
11. TEST FOR PROPER
OPERATION
AND
INSPECT FOR LEAKS.
END OF TASK
13-80
