TM 5-3810-306-34
3. ADJUST ROD PRESSURE CHANNEL.
4. INSTALL COVER (3) WITH SCREWS (2) AND
WIRE SEAL.
a. Connect digital voltmeter to CPU main board.
5. RECONNECT PRESSURE LINES (8) AND (9) TO
PRESSURE TRANSDUCERS (10) AND (11).
1)
Black (-) lead to test point MP15.
6. CONNECT NEGATIVE BATTERY CABLE
AT
SHUNT. (REFER TO TM 5-3810-306-20.)
2)
Red (+) lead to test point MP5.
b. Adjust P5 to obtain a reading of .500 Vdc (500
END OF TASK
mV) on voltmeter.
14-8
