TM 5-3810-306-34
REASSEMBLY:
1. LUBRICATE SPOOL, SEALS, AND RINGS
WITH CLEAN HYDRAULIC OIL.
CAUTION
2. IF REMOVED, INSTALL THRUST WASHER (8)
Proper alignment when inserting
AND MOUNTING PLATE (1). SECURE WITH
spool is required. Do not force spool
SETSCREWS (7) AND SCREWS (6).
into swivel case.
CAUTION
4. INSERT SPOOL (4) INTO BARREL (5).
SECURE SPOOL TO SWIVEL CASE WITH
When installing new seals and rings,
CAPSCREWS (2) AND RETAINING CLIPS (3).
avoid stretching seals or scratching
grooved or gland surfaces.
5. INSTALL MOUNTING CHANNEL (18).
3. INSTALL RINGS AND SEALS.
a. Secure mounting channel (18) to hydraulic
swivel mounting plate (1). Secure with six
a. Install two new preformed packings (9),
capscrews (16), washers (17) and
two split ring bearings (10), ten quad rings
nuts(19)
(11) and bronze filled seals (12).
15-111