CHAPTER 1. INTRODUCTION - TM-9-3990-260-14-P0023
CORROSION PREVENTION AND CONTROL.
Figure 1-1. M3 CROP (Cont)
SAFETY, CARE, AND HANDLING. - TM-9-3990-260-14-P0026
LIST OF ABBREVIATIONS.
Section II. EQUIPMENT DESCRIPTION - TM-9-3990-260-14-P0028
Features - TM-9-3990-260-14-P0029
M3 CROP LOCATION AND DESCRIPTION OF MAJOR COMPONENTS.
Twistlocks - TM-9-3990-260-14-P0031
End Structure Assembly and Bail Bar
Handling Tools Storage.
M3 CROP EQUIPMENT DATA.
CHAPTER 2. OPERATING INSTRUCTIONS (M3 CROP)
EXPLANATION OF PMCS TABLE ENTRIES. - TM-9-3990-260-14-P0036
Figure 2-1. PMCS Walk-Around
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0038
Table 2-1. Operator's Preventive Maintenance Checks and Services - Continued
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0041
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0042
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0043
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0044
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0045
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0046
Section II. OPERATION UNDER USUAL CONDITIONS - TM-9-3990-260-14-P0047
INSTALLING/STOWING M3 CROP CENTER AND REAR BLOCKER ASSEMBLIES.
Stowing the Center Blocker Assembly.
Installing the Rear Blocker Assemblies.
Installing the Rear Blocker Assemblies-continued
Stowing the Rear Blocker Assemblies.
Stowing the Rear Blocker Assemblies-continued
M3 CROP END STRUCTURE ASSEMBLY (A-FRAME) RAISING AND LOWERING PROCEDURES
Raising the End Structure Assembly-continued
Lowering the End Structure Assembly.
Lowering the End Structure Assembly-continued
STACKING/LOADING M3 CROP ON PLS TRUCK.
Stacking/Loading-continued - TM-9-3990-260-14-P0059
Stacking/Loading-continued - TM-9-3990-260-14-P0060
Stacking/Loading-continued - TM-9-3990-260-14-P0061
Stacking/Loading-continued - TM-9-3990-260-14-P0062
Unstacking/Unloading. - TM-9-3990-260-14-P0063
Unstacking/Unloading-continued - TM-9-3990-260-14-P0064
Unstacking/Unloading-continued - TM-9-3990-260-14-P0065
STACKING/LOADING M3 CROP ON PLS TRAILER
LOADING/UNLOADING ISO CONTAINER WITH M3 CROP FROM PLS TRUCK
Loading-continued - TM-9-3990-260-14-P0068
Loading-continued - TM-9-3990-260-14-P0069
Loading-continued - TM-9-3990-260-14-P0070
Loading-continued - TM-9-3990-260-14-P0071
Loading-continued - TM-9-3990-260-14-P0072
Loading-continued - TM-9-3990-260-14-P0073
Loading-continued - TM-9-3990-260-14-P0074
Unloading. - TM-9-3990-260-14-P0075
Unloading-continued - TM-9-3990-260-14-P0076
Unloading-continued - TM-9-3990-260-14-P0077
Unloading-continued - TM-9-3990-260-14-P0078
LOADING/UNLOADING ISO CONTAINER WITH M3 CROP USING FORKLIFT.
Loading-continued - TM-9-3990-260-14-P0081
Loading-continued - TM-9-3990-260-14-P0082
Loading-continued - TM-9-3990-260-14-P0083
Loading-continued - TM-9-3990-260-14-P0084
Loading-continued - TM-9-3990-260-14-P0085
Unloading. - TM-9-3990-260-14-P0086
Unloading-continued - TM-9-3990-260-14-P0087
Unloading-continued - TM-9-3990-260-14-P0088
PREPARATION FOR STORAGE OR SHIPMENT. - TM-9-3990-260-14-P0089
M3 CROP DECALS AND INSTRUCTION PLATES.
CHAPTER 3. OPERATOR MAINTENANCE INSTRUCTIONS (M3 CROP)
Table 3-2. Operator Troubleshooting Procedures
Table 3-2. Operator Troubleshooting Procedures - (Cont)
Section II. MAINTENANCE INSTRUCTIONS.
CHAPTER 4. UNIT MAINTENANCE INSTRUCTIONS (M3 CROP)
Section II. SERVICE UPON RECEIPT - TM-9-3990-260-14-P0096
HAND RECEIPT.
Section III. UNIT MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - TM-9-3990-260-14-P0098
PMCS TABLE EXPLANATION. - TM-9-3990-260-14-P0099
Table 4-1. Unit Maintenance Preventive Maintenance Checks and Services
Table 4-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0101
Table 4-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0102
Table 4-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0103
Table 4-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0104
Table 4-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0105
SECTION IV. UNIT MAINTENANCE PROCEDURES - TM-9-3990-260-14-P0106
Cleaning - TM-9-3990-260-14-P0107
END STRUCTURE ASSEMBLY (A-FRAME) REPLACEMENT.
Removal - TM-9-3990-260-14-P0109
Installation - TM-9-3990-260-14-P0110
Installation-continued - TM-9-3990-260-14-P0111
TWISTLOCK REPLACEMENT. - TM-9-3990-260-14-P0112
Removal. - TM-9-3990-260-14-P0113
ROLLER REPLACEMENT. - TM-9-3990-260-14-P0114
Removal. - TM-9-3990-260-14-P0115
BRACING MECHANISM REPLACEMENT.
STOWAGE BOX DOOR MAINTENANCE.
Removal. - TM-9-3990-260-14-P0118
CHAPTER 5. DIRECT SUPPORT MAINTENANCE (M3 CROP)
Section III. DIRECT SUPPORT MAINTENANCE PROCEDURES - TM-9-3990-260-14-P0120
Suggested Tools and Equipment. - TM-9-3990-260-14-P0121
Damage and Repair. - TM-9-3990-260-14-P0122
GENERAL WELDING MAINTENANCE. - TM-9-3990-260-14-P0123
Table 5-1. Acceptable Crack Length Limits
Removing the CARC Paint Primer and Galvanizing Coatings Prior to Weld Repair
Galvanized Coating Replacement - TM-9-3990-260-14-P0126
DECK PLATE REPLACEMENT.
Replacement Procedure-continued
CHAPTER 6. INTRODUCTION (M3A1 CROP)
EQUIPMENT CONFIGURATION
SAFETY, CARE, AND HANDLING. - TM-9-3990-260-14-P0131
Section II. EQUIPMENT DESCRIPTION - TM-9-3990-260-14-P0132
Features - TM-9-3990-260-14-P0133
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. - TM-9-3990-260-14-P0134
Container Transport Locks
EQUIPMENT DATA.
CHAPTER 7. OPERATING INSTRUCTIONS (M3A1 CROP)
EXPLANATION OF PMCS TABLE ENTRIES. - TM-9-3990-260-14-P0138
Figure 7-1. PMCS Walk-Around
Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0140
Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0141
Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0142
Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0143
Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0144
Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0145
Section II. OPERATION UNDER USUAL CONDITIONS - TM-9-3990-260-14-P0146
Raising the A-frame Assembly-continued
Lowering the A-frame Assembly
Lowering the A-frame Assembly-continued
FRONT LOAD RESTRAINT PLATES RAISING AND LOWERING PROCEDURES.
STACKING/LOADING M3A1 CROP ON PLS TRUCK.
Stacking/Loading-continued - TM-9-3990-260-14-P0152
Stacking/Loading-continued - TM-9-3990-260-14-P0153
Stacking/Loading-continued - TM-9-3990-260-14-P0154
Stacking/Loading-continued - TM-9-3990-260-14-P0155
Unstacking/Unloading. - TM-9-3990-260-14-P0156
Unstacking/Unloading-continued - TM-9-3990-260-14-P0157
Unstacking/Unloading-continued - TM-9-3990-260-14-P0158
STACKING/LOADING M3A1 CROP ON PLS TRAILER.
LOADING/UNLOADING ISO CONTAINER WITH M3A1 CROP FROM PLS TRUCK.
Loading-continued - TM-9-3990-260-14-P0161
Loading-continued - TM-9-3990-260-14-P0162
Loading-continued - TM-9-3990-260-14-P0163
Loading-continued - TM-9-3990-260-14-P0164
Unloading. - TM-9-3990-260-14-P0165
Unloading-continued - TM-9-3990-260-14-P0166
LOADING/UNLOADING ISO CONTAINER WITH M3A1 CROP USING FORKLIFT.
Loading-continued - TM-9-3990-260-14-P0168
Loading-continued - TM-9-3990-260-14-P0169
Loading-continued - TM-9-3990-260-14-P0170
Unloading. - TM-9-3990-260-14-P0171
Unloading-continued - TM-9-3990-260-14-P0172
PREPARATION FOR STORAGE OR SHIPMENT. - TM-9-3990-260-14-P0173
Preparation for Shipment.
DECALS AND INSTRUCTION PLATES. - TM-9-3990-260-14-P0175
CHAPTER 8. OPERATOR MAINTENANCE INSTRUCTIONS (M3A1 CROP)
Table 8-2. Operator Troubleshooting Procedures
CHAPTER 9. UNIT MAINTENANCE INSTRUCTIONS (M3A1 CROP)
Section II. SERVICE UPON RECEIPT - TM-9-3990-260-14-P0180
LUBRICATION.
Section III. UNIT MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - TM-9-3990-260-14-P0182
PMCS TABLE EXPLANATION. - TM-9-3990-260-14-P0183
Table 9-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0184
Table 9-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0185
Table 9-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0186
Table 9-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0187
Table 9-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0188
Section IV. UNIT MAINTENANCE PROCEDURES - TM-9-3990-260-14-P0189
GENERAL MAINTENANCE INSTRUCTIONS-continued
A-FRAME ASSEMBLY REPLACEMENT.
Removal-continued - TM-9-3990-260-14-P0192
Installation - TM-9-3990-260-14-P0193
TWISTLOCK REPLACEMENT. - TM-9-3990-260-14-P0194
Removal. - TM-9-3990-260-14-P0195
ROLLER REPLACEMENT. - TM-9-3990-260-14-P0196
Removal. - TM-9-3990-260-14-P0197
CONTAINER TRANSPORT LOCK REPLACEMENT.
Installation. - TM-9-3990-260-14-P0199
WEAR PLATE REPLACEMENT.
Installation. - TM-9-3990-260-14-P0201
LOAD RESTRAINT PLATES (REAR) REPLACEMENT.
DOOR HOLDER REPLACEMENT.
BUMPER REPLACEMENT.
STOWAGE BOX DOOR REPLACEMENT.
Schematic Drawing - TM-9-3990-260-14-P0206
CHAPTER 10. DIRECT SUPPORT MAINTENANCE (M3A1 CROP)
Section III. DIRECT SUPPORT MAINTENANCE PROCEDURES - TM-9-3990-260-14-P0208
Suggested Tools and Equipment. - TM-9-3990-260-14-P0209
Damage and Repair. - TM-9-3990-260-14-P0210
GENERAL WELDING MAINTENANCE. - TM-9-3990-260-14-P0211
Table 10-1. Acceptable Crack Length Limits
Removing the CARC Paint Primer and Galvanizing Coatings Prior to Weld Repair.
Galvanized Coating Replacement - TM-9-3990-260-14-P0214
APPENDIX A. REFERENCES - TM-9-3990-260-14-P0215
TECHNICAL MANUALS.
APPENDIX B. MAINTENANCE ALLOCATION CHART (MAC) - TM-9-3990-260-14-P0217
EXPLANATION OF COLUMNS IN SECTION II.
EXPLANATION OF COLUMNS IN TOOL AND TEST EQUIPMENT REQUIREMENTS, SECTION III.
Section II. MAINTENANCE ALLOCATION CHART (MAC) FOR CONTAINER ROLL-IN/OUT PLATFORM (M3 AND M3A1 CROP)
Section IV. REMARKS
APPENDIX C. COMPONENTS OF END ITEM (COEI) AND BASIC ISSUE ITEMS (BII) LISTS
APPENDIX D. ADDITIONAL AUTHORIZATION LIST (AAL)
APPENDIX E. EXPENDABLE AND DURABLE ITEMS LIST - TM-9-3990-260-14-P0227
Section II. EXPENDABLE AND DURABLE ITEMS LIST - TM-9-3990-260-14-P0228
APPENDIX F. UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
Source Code - TM-9-3990-260-14-P0230
Maintenance Code - TM-9-3990-260-14-P0231
Recoverability Code - TM-9-3990-260-14-P0232
EXPLANATION OF COLUMNS (SECTION IV).
SPECIAL INFORMATION.
ABBREVIATIONS.
FIGURE 1. M3 CROP
FIGURE 1a. M3 CROP
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0239
GROUP 3301 REUSABLE SHIPPING CONTAINER-continued
FIGURE 2. REAR BLOCKER ASSEMBLY AND STOWAGE DOOR COMPONENTS
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0243
FIGURE 3. CENTER BLOCKER ASSEMBLY
GROUP 3301REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0245
FIGURE 4. TWISTLOCK
GROUP 3301REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0247
FIGURE 5. DATA PLATES
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0249
FIGURE 6. BASE ASSEMBLY AND REAR FRAME COMPONENTS, M3A1
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0251
FIGURE 7. FRONT FRAME COMPONENTS
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0253
FIGURE 8. STORAGE DOORS AND TWISTLOCK ASSEMBLY, M3A1
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0255
FIGURE 9. DATA PLATES, M3A1
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0257
GROUP 94 REPAIR KITS - TM-9-3990-260-14-P0259
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0261
CROSS REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX
CROSS REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX-continued - TM-9-3990-260-14-P0264
CROSS REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX-continued - TM-9-3990-260-14-P0265
CROSS REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX-continued - TM-9-3990-260-14-P0266
APPENDIX G. ILLUSTRATED LIST OF MANUFACTURED ITEMS - TM-9-3990-260-14-P0267
ISO CONTAINER LOADING PLATFORMS.
LANYARD ASSEMBLIES.
APPENDIX H. MANDATORY REPLACEMENT PARTS LIST
Table H-1. Mandatory Replacement Parts, M3 CROP
APPENDIX I. TOOL IDENTIFICATION LIST
Table 1-1. Tool Identification List
APPENDIX J. M3 CROP LUBRICATION INSTRUCTIONS
Section II. LUBRICATION POINTS - TM-9-3990-260-14-P0276
Section III. LUBRICATION TABLE - TM-9-3990-260-14-P0277
Section IV. LOCALIZED LUBRICATION POINTS - TM-9-3990-260-14-P0278
APPENDIX K. M3A1 CROP LUBRICATION INSTRUCTIONS
Section II. LUBRICATION POINTS - TM-9-3990-260-14-P0280
Section III. LUBRICATION TABLE - TM-9-3990-260-14-P0281
Section IV. LOCALIZED LUBRICATION POINTS - TM-9-3990-260-14-P0282
APPENDIX L. TORQUE LIMITS
Table L-1. Torque Limits
APPENDIX M. STOWAGE AND SIGN GUIDE
Figure M-2. M3 CROP Sign Guide
Figure M-3. M3A 1 CROP Stowage Location
Figure M-4. M3A 1 CROP Sign Guide M-4
TM-9-3990-260-14-P Container Roll-In/Out Paltform (Crop) Model M3 Manual
CORROSION PREVENTION AND CONTROL.
Figure 1-1. M3 CROP (Cont)
SAFETY, CARE, AND HANDLING. - TM-9-3990-260-14-P0026
LIST OF ABBREVIATIONS.
Section II. EQUIPMENT DESCRIPTION - TM-9-3990-260-14-P0028
Features - TM-9-3990-260-14-P0029
M3 CROP LOCATION AND DESCRIPTION OF MAJOR COMPONENTS.
Twistlocks - TM-9-3990-260-14-P0031
End Structure Assembly and Bail Bar
Handling Tools Storage.
M3 CROP EQUIPMENT DATA.
CHAPTER 2. OPERATING INSTRUCTIONS (M3 CROP)
EXPLANATION OF PMCS TABLE ENTRIES. - TM-9-3990-260-14-P0036
Figure 2-1. PMCS Walk-Around
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0038
Table 2-1. Operator's Preventive Maintenance Checks and Services - Continued
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0041
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0042
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0043
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0044
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0045
Table 2-1. Operators Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0046
Section II. OPERATION UNDER USUAL CONDITIONS - TM-9-3990-260-14-P0047
INSTALLING/STOWING M3 CROP CENTER AND REAR BLOCKER ASSEMBLIES.
Stowing the Center Blocker Assembly.
Installing the Rear Blocker Assemblies.
Installing the Rear Blocker Assemblies-continued
Stowing the Rear Blocker Assemblies.
Stowing the Rear Blocker Assemblies-continued
M3 CROP END STRUCTURE ASSEMBLY (A-FRAME) RAISING AND LOWERING PROCEDURES
Raising the End Structure Assembly-continued
Lowering the End Structure Assembly.
Lowering the End Structure Assembly-continued
STACKING/LOADING M3 CROP ON PLS TRUCK.
Stacking/Loading-continued - TM-9-3990-260-14-P0059
Stacking/Loading-continued - TM-9-3990-260-14-P0060
Stacking/Loading-continued - TM-9-3990-260-14-P0061
Stacking/Loading-continued - TM-9-3990-260-14-P0062
Unstacking/Unloading. - TM-9-3990-260-14-P0063
Unstacking/Unloading-continued - TM-9-3990-260-14-P0064
Unstacking/Unloading-continued - TM-9-3990-260-14-P0065
STACKING/LOADING M3 CROP ON PLS TRAILER
LOADING/UNLOADING ISO CONTAINER WITH M3 CROP FROM PLS TRUCK
Loading-continued - TM-9-3990-260-14-P0068
Loading-continued - TM-9-3990-260-14-P0069
Loading-continued - TM-9-3990-260-14-P0070
Loading-continued - TM-9-3990-260-14-P0071
Loading-continued - TM-9-3990-260-14-P0072
Loading-continued - TM-9-3990-260-14-P0073
Loading-continued - TM-9-3990-260-14-P0074
Unloading. - TM-9-3990-260-14-P0075
Unloading-continued - TM-9-3990-260-14-P0076
Unloading-continued - TM-9-3990-260-14-P0077
Unloading-continued - TM-9-3990-260-14-P0078
LOADING/UNLOADING ISO CONTAINER WITH M3 CROP USING FORKLIFT.
Loading-continued - TM-9-3990-260-14-P0081
Loading-continued - TM-9-3990-260-14-P0082
Loading-continued - TM-9-3990-260-14-P0083
Loading-continued - TM-9-3990-260-14-P0084
Loading-continued - TM-9-3990-260-14-P0085
Unloading. - TM-9-3990-260-14-P0086
Unloading-continued - TM-9-3990-260-14-P0087
Unloading-continued - TM-9-3990-260-14-P0088
PREPARATION FOR STORAGE OR SHIPMENT. - TM-9-3990-260-14-P0089
M3 CROP DECALS AND INSTRUCTION PLATES.
CHAPTER 3. OPERATOR MAINTENANCE INSTRUCTIONS (M3 CROP)
Table 3-2. Operator Troubleshooting Procedures
Table 3-2. Operator Troubleshooting Procedures - (Cont)
Section II. MAINTENANCE INSTRUCTIONS.
CHAPTER 4. UNIT MAINTENANCE INSTRUCTIONS (M3 CROP)
Section II. SERVICE UPON RECEIPT - TM-9-3990-260-14-P0096
HAND RECEIPT.
Section III. UNIT MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - TM-9-3990-260-14-P0098
PMCS TABLE EXPLANATION. - TM-9-3990-260-14-P0099
Table 4-1. Unit Maintenance Preventive Maintenance Checks and Services
Table 4-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0101
Table 4-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0102
Table 4-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0103
Table 4-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0104
Table 4-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0105
SECTION IV. UNIT MAINTENANCE PROCEDURES - TM-9-3990-260-14-P0106
Cleaning - TM-9-3990-260-14-P0107
END STRUCTURE ASSEMBLY (A-FRAME) REPLACEMENT.
Removal - TM-9-3990-260-14-P0109
Installation - TM-9-3990-260-14-P0110
Installation-continued - TM-9-3990-260-14-P0111
TWISTLOCK REPLACEMENT. - TM-9-3990-260-14-P0112
Removal. - TM-9-3990-260-14-P0113
ROLLER REPLACEMENT. - TM-9-3990-260-14-P0114
Removal. - TM-9-3990-260-14-P0115
BRACING MECHANISM REPLACEMENT.
STOWAGE BOX DOOR MAINTENANCE.
Removal. - TM-9-3990-260-14-P0118
CHAPTER 5. DIRECT SUPPORT MAINTENANCE (M3 CROP)
Section III. DIRECT SUPPORT MAINTENANCE PROCEDURES - TM-9-3990-260-14-P0120
Suggested Tools and Equipment. - TM-9-3990-260-14-P0121
Damage and Repair. - TM-9-3990-260-14-P0122
GENERAL WELDING MAINTENANCE. - TM-9-3990-260-14-P0123
Table 5-1. Acceptable Crack Length Limits
Removing the CARC Paint Primer and Galvanizing Coatings Prior to Weld Repair
Galvanized Coating Replacement - TM-9-3990-260-14-P0126
DECK PLATE REPLACEMENT.
Replacement Procedure-continued
CHAPTER 6. INTRODUCTION (M3A1 CROP)
EQUIPMENT CONFIGURATION
SAFETY, CARE, AND HANDLING. - TM-9-3990-260-14-P0131
Section II. EQUIPMENT DESCRIPTION - TM-9-3990-260-14-P0132
Features - TM-9-3990-260-14-P0133
LOCATION AND DESCRIPTION OF MAJOR COMPONENTS. - TM-9-3990-260-14-P0134
Container Transport Locks
EQUIPMENT DATA.
CHAPTER 7. OPERATING INSTRUCTIONS (M3A1 CROP)
EXPLANATION OF PMCS TABLE ENTRIES. - TM-9-3990-260-14-P0138
Figure 7-1. PMCS Walk-Around
Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0140
Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0141
Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0142
Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0143
Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0144
Table 7-1. Operator's Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0145
Section II. OPERATION UNDER USUAL CONDITIONS - TM-9-3990-260-14-P0146
Raising the A-frame Assembly-continued
Lowering the A-frame Assembly
Lowering the A-frame Assembly-continued
FRONT LOAD RESTRAINT PLATES RAISING AND LOWERING PROCEDURES.
STACKING/LOADING M3A1 CROP ON PLS TRUCK.
Stacking/Loading-continued - TM-9-3990-260-14-P0152
Stacking/Loading-continued - TM-9-3990-260-14-P0153
Stacking/Loading-continued - TM-9-3990-260-14-P0154
Stacking/Loading-continued - TM-9-3990-260-14-P0155
Unstacking/Unloading. - TM-9-3990-260-14-P0156
Unstacking/Unloading-continued - TM-9-3990-260-14-P0157
Unstacking/Unloading-continued - TM-9-3990-260-14-P0158
STACKING/LOADING M3A1 CROP ON PLS TRAILER.
LOADING/UNLOADING ISO CONTAINER WITH M3A1 CROP FROM PLS TRUCK.
Loading-continued - TM-9-3990-260-14-P0161
Loading-continued - TM-9-3990-260-14-P0162
Loading-continued - TM-9-3990-260-14-P0163
Loading-continued - TM-9-3990-260-14-P0164
Unloading. - TM-9-3990-260-14-P0165
Unloading-continued - TM-9-3990-260-14-P0166
LOADING/UNLOADING ISO CONTAINER WITH M3A1 CROP USING FORKLIFT.
Loading-continued - TM-9-3990-260-14-P0168
Loading-continued - TM-9-3990-260-14-P0169
Loading-continued - TM-9-3990-260-14-P0170
Unloading. - TM-9-3990-260-14-P0171
Unloading-continued - TM-9-3990-260-14-P0172
PREPARATION FOR STORAGE OR SHIPMENT. - TM-9-3990-260-14-P0173
Preparation for Shipment.
DECALS AND INSTRUCTION PLATES. - TM-9-3990-260-14-P0175
CHAPTER 8. OPERATOR MAINTENANCE INSTRUCTIONS (M3A1 CROP)
Table 8-2. Operator Troubleshooting Procedures
CHAPTER 9. UNIT MAINTENANCE INSTRUCTIONS (M3A1 CROP)
Section II. SERVICE UPON RECEIPT - TM-9-3990-260-14-P0180
LUBRICATION.
Section III. UNIT MAINTENANCE PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - TM-9-3990-260-14-P0182
PMCS TABLE EXPLANATION. - TM-9-3990-260-14-P0183
Table 9-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0184
Table 9-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0185
Table 9-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0186
Table 9-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0187
Table 9-1. Unit Maintenance Preventive Maintenance Checks and Services - Continued - TM-9-3990-260-14-P0188
Section IV. UNIT MAINTENANCE PROCEDURES - TM-9-3990-260-14-P0189
GENERAL MAINTENANCE INSTRUCTIONS-continued
A-FRAME ASSEMBLY REPLACEMENT.
Removal-continued - TM-9-3990-260-14-P0192
Installation - TM-9-3990-260-14-P0193
TWISTLOCK REPLACEMENT. - TM-9-3990-260-14-P0194
Removal. - TM-9-3990-260-14-P0195
ROLLER REPLACEMENT. - TM-9-3990-260-14-P0196
Removal. - TM-9-3990-260-14-P0197
CONTAINER TRANSPORT LOCK REPLACEMENT.
Installation. - TM-9-3990-260-14-P0199
WEAR PLATE REPLACEMENT.
Installation. - TM-9-3990-260-14-P0201
LOAD RESTRAINT PLATES (REAR) REPLACEMENT.
DOOR HOLDER REPLACEMENT.
BUMPER REPLACEMENT.
STOWAGE BOX DOOR REPLACEMENT.
Schematic Drawing - TM-9-3990-260-14-P0206
CHAPTER 10. DIRECT SUPPORT MAINTENANCE (M3A1 CROP)
Section III. DIRECT SUPPORT MAINTENANCE PROCEDURES - TM-9-3990-260-14-P0208
Suggested Tools and Equipment. - TM-9-3990-260-14-P0209
Damage and Repair. - TM-9-3990-260-14-P0210
GENERAL WELDING MAINTENANCE. - TM-9-3990-260-14-P0211
Table 10-1. Acceptable Crack Length Limits
Removing the CARC Paint Primer and Galvanizing Coatings Prior to Weld Repair.
Galvanized Coating Replacement - TM-9-3990-260-14-P0214
APPENDIX A. REFERENCES - TM-9-3990-260-14-P0215
TECHNICAL MANUALS.
APPENDIX B. MAINTENANCE ALLOCATION CHART (MAC) - TM-9-3990-260-14-P0217
EXPLANATION OF COLUMNS IN SECTION II.
EXPLANATION OF COLUMNS IN TOOL AND TEST EQUIPMENT REQUIREMENTS, SECTION III.
Section II. MAINTENANCE ALLOCATION CHART (MAC) FOR CONTAINER ROLL-IN/OUT PLATFORM (M3 AND M3A1 CROP)
Section IV. REMARKS
APPENDIX C. COMPONENTS OF END ITEM (COEI) AND BASIC ISSUE ITEMS (BII) LISTS
APPENDIX D. ADDITIONAL AUTHORIZATION LIST (AAL)
APPENDIX E. EXPENDABLE AND DURABLE ITEMS LIST - TM-9-3990-260-14-P0227
Section II. EXPENDABLE AND DURABLE ITEMS LIST - TM-9-3990-260-14-P0228
APPENDIX F. UNIT, DIRECT SUPPORT, AND GENERAL SUPPORT MAINTENANCE REPAIR PARTS AND SPECIAL TOOLS LIST (RPSTL)
Source Code - TM-9-3990-260-14-P0230
Maintenance Code - TM-9-3990-260-14-P0231
Recoverability Code - TM-9-3990-260-14-P0232
EXPLANATION OF COLUMNS (SECTION IV).
SPECIAL INFORMATION.
ABBREVIATIONS.
FIGURE 1. M3 CROP
FIGURE 1a. M3 CROP
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0239
GROUP 3301 REUSABLE SHIPPING CONTAINER-continued
FIGURE 2. REAR BLOCKER ASSEMBLY AND STOWAGE DOOR COMPONENTS
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0243
FIGURE 3. CENTER BLOCKER ASSEMBLY
GROUP 3301REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0245
FIGURE 4. TWISTLOCK
GROUP 3301REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0247
FIGURE 5. DATA PLATES
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0249
FIGURE 6. BASE ASSEMBLY AND REAR FRAME COMPONENTS, M3A1
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0251
FIGURE 7. FRONT FRAME COMPONENTS
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0253
FIGURE 8. STORAGE DOORS AND TWISTLOCK ASSEMBLY, M3A1
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0255
FIGURE 9. DATA PLATES, M3A1
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0257
GROUP 94 REPAIR KITS - TM-9-3990-260-14-P0259
GROUP 3301 REUSABLE SHIPPING CONTAINER - TM-9-3990-260-14-P0261
CROSS REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX
CROSS REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX-continued - TM-9-3990-260-14-P0264
CROSS REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX-continued - TM-9-3990-260-14-P0265
CROSS REFERENCE INDEXES NATIONAL STOCK NUMBER INDEX-continued - TM-9-3990-260-14-P0266
APPENDIX G. ILLUSTRATED LIST OF MANUFACTURED ITEMS - TM-9-3990-260-14-P0267
ISO CONTAINER LOADING PLATFORMS.
LANYARD ASSEMBLIES.
APPENDIX H. MANDATORY REPLACEMENT PARTS LIST
Table H-1. Mandatory Replacement Parts, M3 CROP
APPENDIX I. TOOL IDENTIFICATION LIST
Table 1-1. Tool Identification List
APPENDIX J. M3 CROP LUBRICATION INSTRUCTIONS
Section II. LUBRICATION POINTS - TM-9-3990-260-14-P0276
Section III. LUBRICATION TABLE - TM-9-3990-260-14-P0277
Section IV. LOCALIZED LUBRICATION POINTS - TM-9-3990-260-14-P0278
APPENDIX K. M3A1 CROP LUBRICATION INSTRUCTIONS
Section II. LUBRICATION POINTS - TM-9-3990-260-14-P0280
Section III. LUBRICATION TABLE - TM-9-3990-260-14-P0281
Section IV. LOCALIZED LUBRICATION POINTS - TM-9-3990-260-14-P0282
APPENDIX L. TORQUE LIMITS
Table L-1. Torque Limits
APPENDIX M. STOWAGE AND SIGN GUIDE
Figure M-2. M3 CROP Sign Guide
Figure M-3. M3A 1 CROP Stowage Location
Figure M-4. M3A 1 CROP Sign Guide M-4
TM-9-3990-260-14-P Container Roll-In/Out Paltform (Crop) Model M3 Manual
