TM 9-3990-260-14&P
a.
Removal.
Support roller during removal or roller may drop causing injury to personnel.
NOTE
This procedure shows replacement of one set of rollers. Replacement is the same for all
rollers.
(1) Remove spring pin (1) and washer (2) from roller pin assembly (3). Discard the spring pin
(1).
(2) While supporting rollers (4), remove the roller pin assembly (3) from bracket (5) and main
beam (6).
b.
Installation.
(I)
Apply GAA grease to roller pin assembly (3).
(2) While supporting rollers (4) in place, push roller pin assembly (3) through main beam (6),
through rollers (4), and through bracket (5).
(3) Replace washer (2) and insert spring pin (1).
c.
Follow-on Maintenance.
Unload M3 CROP from PLS Truck.
4-21