TM 10-3930-641-20
(Sheet 2 of 3)
STARTING SOLENOID REMOVAL/INSTALLATION/ADJUSTMENT (CONT)
REMARKS
ACTION
LOCATION/ITEM
Mark for location and disconnect.
1.
Remove two nuts and remove connector.
2. Connector (1)
Remove four capscrews which hold solenoid
3. Capscrews (2)
to starting motor.
Remove.
4. Solenoid (3)
Position on starting motor.
Solenoid (3)
1.
Install and tighten four capscrews.
2. Capscrews (2)
Adjust clearance.
3. Pinion (4)
NOTE
Do not install connector (1).
Connect a battery positive lead to termi-
a.
nal (5), marked SW.
b. Connect a ground to terminal (6).
Go on to Sheet 3
2-262