TM 10-3930-641-34-2
TRANSMISSION DESASSEMBLY (CONT)
LOCATION/ITEM
ACTION
REMARKS
CAUTION
As transmission is disassembled, use a parts
rack to keep plates and disc assemblies in
same order in which they were removed.
This is necessary because clutch plates or
disc assemblies can be used again only in
their original location. Failure to follow this
practice can cause excessive wear and possible
failure of transmission.
1
Transmission
Put on wood blocks with output end up as
shown.
2.
Planetary group capscrews
a. Remove.
b. Use two of the capscrews as shown to
force the planetary group from the case.
TA099275
Go on to Sheet 3
4-69