TRANSMISSION ASSEMBLY (CONT)
(Sheet 24 of 31)
Install in manifold assembly until it makes
contact with counterbore in manifold
Notch on inner race must face downward.
Retaining ring (30)
Small preformed packing (103) and
a. Install in manifold assembly (97) as
large preformed packing (93)
b. Lubricate with clean oil.
Manifold assembly (97)
a. Attach hoist as shown.
b. Install on No. 4 clutch housing.
Be sure notch in bearing aligns with pin in
shaft assembly before manifold assembly is
lowered all the way.
Turn No. 5 clutch housing (115) until two
of the capscrews (118) align with openings
in the manifold assembly.
Go on to Sheet 25