TM 10-3930-641-34-2
DIFFERENTIAL AND BEVEL GEAR ADJUSTMENT (CONT)
(Sheet 4 of 7)
LOCATION/ITEM
ACTION
REMARKS
6.
Adjustment ring (8)
Do not tighten.
7.
Adjustment ring (11)
Tighten until the amount of backlash (free
movement) between ring gear (7) and
pinion (6) is .014 + .005 in. (0.36 + 0.13 mm).
8.
Adjustment ring (8)
a. Tighten while turning ring gear (7). Tighten
to turn ring gear.
b. Install a dial indicator so that the tip of the
indicator is in contact with upper bearing
cap.
c.
Tighten adjustment ring (8) until distance
"A" increases by .018 + .002 in.
(0.46 + 0.05 mm).
TA099426
Go on to Sheet 5
4-292