TM 10-3930-641-34-2
DIFFERENTIAL AND BEVEL GEAR ADJUSTMENT (CONT)
(Sheet 5 of 7)
LOCATION/ITEM
ACTION
REMARKS
9.
Ring Gear (7)
a. Measure the backlash between the pinion
and ring gear. The backlash must be .014
.005 (0.36 0.13 mm).
b. If the backlash is too much, loosen adjust-
ment ring (8) and tighten adjustment
ring (11) the same amount.
c.
If the backlash is not enough, loosen
adjustment ring (11) and tighten adjust-
ment ring (8) the same amount.
D
if
ferential bearing preload will not change if you
loosen one ring and then tighten the other ring the
same amount.
10.
Capscrews (10)
Lubricate threads and tighten to a torque of
315 to 385 lb. ft. (425 to 515 N-m).
TA099427
Go on to Sheet 6
4-293