TM 10-3930-641-34-2
HAND STEERING UNIT DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 6 of 6 )
LOCATION/ITEM
ACTION
REMARKS
10.
Spacer (14)
Install.
11.
Cap (17)
Install using seven capscrews (16).
NOTE
Tighten capscrews to a torque of 18-24 lb. ft.
(24-33 N.m).
12.
Preformed packing (3)
Install in body.
13.
Two races (1) and bearing (2)
Install.
14.
Lip seal (7)
Install in bushing (6) with a seal driver.
NOTE
Seal must make contact with counterbore in
bushing and lip must be toward outside of
hand metering unit.
15.
Bushing (6)
Install.
16.
Retaining ring (4)
Install.
End
6-23