TM 10-3930-641-34-2
HYDRAULIC OIL COOLER OIL LINES REMOVAL/INSTALLATION (CONT)
(Sheet 2 of 2)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1.
Capscrews and washers securing
Remove.
flanges
2.
Hose assemblies
Remove and discard preformed packing.
3.
Tube assemblies
Disconnect connectors. Loosen hose clamps.
4.
Clips and brackets
Remove capscrews and nuts securing clips and
brackets. Remove tube assemblies.
INSTALLATION
1.
Clips and brackets and tube
Position clips and brackets onto tube
assemblies
assemblies. Position tube assemblies.
2.
Tube connectors
Connect tube connectors and secure hose
clamps.
3.
Hose assemblies
Lubricate new preformed packing with oil and
position into flanges. Position hose assemblies
and secure with capscrews and washers.
TA172254
END
7-21