TM 10-3930-641-34-2
ROLL-OVER PROTECTIVE STRUCTURE REMOVAL/INSTALLATION (CONT)
(Sheet 6 of 7)
LOCATION/ITEM
ACTION
REMARKS
3.
Support assemblies
a. Install support assemblies (10).
b.
spacers (15).
c.
Install plate (7) behind support (10) in
grooved slot behind cab.
d. Install capscrew (8) and lockwasher to hold
plate in place.
4.
Ground wire
Install at top and bottom of support (10).
5.
Capscrews (8 and 15)
a. Torque the 1 inch capscrews to 560 to 720
lb. ft. (775 to 975 N m).
b. Torque 1-1/8 inch capscrews to 700 to 900)
lb. ft. (950 to 1250 N m).
NOTE
Terminals are color coded and must be con-
nected to the proper color.
6.
Wiring harness
Connect wiring harness to the back of cab.
TA099216
Go on to Sheet 7
8-16