PREPARATION FOR TRANSPORT - CONTINUED
HIGHWAY TRANSPORT - CONTINUED
Unload RTCH from M1000 Trailer.
a. Remove tiedowns from RTCH and trailer.
b. Remove two locking pins (3) and transport boom rest (2) from underside of boom at front.
c. Install transport boom rest (2) and two bolts (1) on inside rear bumper.
d. Place boom and boom support in operational position (WP 0007 00).
e. Place cab in operational position (WP 0007 00).
f. Lower loading ramps on M1000 trailer and place in outside (full wide) position (TM 9-2330-381-14).
g. Start RTCH engine.
Always use a ground guide when driving RTCH down trailer ramps. Failure to use a ground guide
may result in an accident, causing death or injury to personnel or damage to equipment.
h. Slowly drive RTCH down trailer ramps.
i. Stow M1000 trailer loading ramps (TM 9-2330-381-14).
j. Have Organizational Maintenance install tophandler (TM 10-3930-675-24).