TM 10-3930-675-20-2
0169 00-2
CONTROL VALVE SOLENOIDS REPLACEMENT - CONTINUED
0169 00
TYPE A SOLENOID INSTALLATION
NOTE
Perform following steps for each of 12 solenoids to be installed.
1.
Install new o-ring (5) to solenoid (4).
2.
Install solenoid (4) to control valve (3) with two screws (2).
3.
Connect connector (1) of tophandler wiring harness to solenoid (4).
TYPE B SOLENOID REMOVAL
NOTE
Perform following steps for each of two solenoids to be removed.
1.
Press in on retaining clip (8) on side of connector (7) and disconnect connector of tophandler wiring harness from side
of solenoid (10).
2.
Remove nut (9) and slide solenoid (10) out from control valve (11).
1
2
3
4
5