CAB SLIDING CYLINDER REPLACEMENT
THIS WORK PACKAGE COVERS
Tools and Special Tools
Tool kit, general mechanics (Item 31, WP 0204 00)
Pan, drain (Item 20, WP 0204 00)
Cap set, protective (Item 4, WP 0203 00)
Grease, GAA (Item 16, WP 0203 00)
Oil, lubricating (Item 19, WP 0203 00)
Rag, wiping (Item 22, WP 0203 00)
Tag, marker (Item 28, WP 0203 00)
WP 0183 00
WP 0194 00
Parking brake applied (TM 10-3930-675-10)
Hydraulic system pressure relieved (WP 0164 00)
Hydraulic reservoir ball valve closed (WP 0179 00)
DO NOT disconnect or remove any hydraulic system line or fitting unless hydraulic system pressure
has been relieved. Tighten all connections before applying pressure. Escaping hydraulic fluid under
pressure can penetrate the skin, causing serious injury.
Search for leaks with a piece of cardboard. Protect hands and body from high-pressure fluids. If an acci-
dent occurs, see a doctor immediately. Any fluid injected into the skin must be surgically removed
within a few hours or gangrene may result.
At operating temperature, hydraulic oil is hot. Allow hydraulic oil to cool before disconnecting any
hydraulic lines. Failure to do so could result in injury.
Hydraulic fluid is slippery. Immediately wipe up any spills. Failure to follow this warning may result in
injury to personnel.
Wipe area clean around all hydraulic connections prior to disconnecting. Cap or plug all openings after dis-
connecting. Contamination of hydraulic system could result in equipment failure.
Tag all hydraulic lines.