Type of Manual. This manual is for use in performing Organizational Maintenance and Troubleshooting on the Rough
Terrain Container Handler (RTCH), RT 240, Rough Terrain Container Handler (RTCH), RT 240 (RESET), and Rough
Terrain Container Handler (RTCH), RT 240V2.
Equipment Name and Model Number. Rough Terrain Container Handler (RTCH), RT 240, Rough Terrain Container
Handler (RTCH), RT 240 (RESET), and Rough Terrain Container Handler (RTCH), RT 240V2.
Purpose of Equipment. The RTCH-RT 240, RTCH-RT 240 (RESET), and RTCH-RT 240V2 are designed to lift and
stack 20 and 40 ft International Standard Organization (ISO) containers, loaded to a gross weight of 53,000 lb
MAINTENANCE FORMS, RECORDS, AND REPORTS
Department of the Army forms and procedures used for the equipment will be those prescribed by DA PAM 750-8,
The Army Maintenance Management System (TAMMS) Users Manual, as contained in the Maintenance Management
REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIR)
If your RTCH needs improvement, let us know. Send us an EIR. You, the user, are the only one who can tell us what you
don't like about your equipment. Let us know why you don't like the design or performance. Put it on an SF Form 368 (Prod-
uct Quality Deficiency Report). Mail it to us at: Commander, U.S. Army Tank-automotive and Armaments Command, ATTN:
AMSTA-AC-NML, Rock Island, Illinois 61299-7630. We'll send you a reply.
CORROSION PREVENTION AND CONTROL (CPC)
Corrosion Prevention and Control (CPC) of Army materiel is a continuing concern. It is important that any corrosion
problems with this item be reported so that the problem can be corrected and improvements can be made to prevent the
problem in future items.
While corrosion is typically associated with rusting of metals, it can also include deterioration of other materials, such as
rubber and plastic. Unusual cracking, softening, swelling, or breaking of these materials may be a corrosion problem. If
a corrosion problem is identified, it can be reported using SF Form 368 (Product Quality Deficiency Report). Use of key
words such as "corrosion," "rust," "deterioration," or "cracking" will ensure that the information is identified as a CPC
problem. The form should be submitted to the address specified in DA PAM 750-8.
OZONE DEPLETING SUBSTANCES
Listing to be provided by requiring activity.
DESTRUCTION OF ARMY MATERIEL TO PREVENT ENEMY USE
For destruction of Army materiel to prevent enemy use, refer to TM 750-244-6.
PREPARATION FOR STORAGE OR SHIPMENT
For preparation for storage or shipment procedures, refer to TM 10-3930-675-24.
The vehicles are warranted by Kalmar RT in accordance with TB 10-3930-675-24. Warranty starts on the date found in
block 23, DA Form 2408-9 in the logbook. Report all defects in material or workmanship to your supervisor, who will take
appropriate action through your Organizational Maintenance shop.