TM 10-3930-675-24-1
STEERING SENSOR TROUBLESHOOTING - CONTINUED
0035 00
Table 9. Error Code 309 - Right-Front Wheel Sensor Circuit Failure Troubleshooting Procedures.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
NOTE
Error Code 309 - Right-Front Wheel Sensor
Circuit Failure.
Error codes 301 and 305 may be activated with error
code 309.
1. Check right-front wheel sensor Replace sensor if damaged (WP
and wire for damage.
0104 00).
2. Check signal. Enter DIAG
If signals 1 and 2 are around 70
STEERING 8(16) in the
and do not change, this indicates
diagnostic menu. Observe if
a break in the circuit or in the
signals 1 and 2 change when
wheel sensor. Continue with step
steering in both directions.
3.
If resistance is not as specified,
engine cover to access X167.
replace right-front wheel sensor
Disconnect wires 1, 2, and 3
(WP 0104 00). Reconnect wheel
sensor wires 1, 2, and 3 after
00-20). Check resistance
checking.
between wires 1 and 3.
Resistance should be around
2k Ohms. Check resistance
between wires 1 and 2.
Resistance should be 2k to 4k
Ohms.
4. Check resistance. Disconnect
If resistance is not as specified,
wires 4, 5, and YE/GN from
replace right-front wheel sensor
X167 pins 4, 5, and 6 (WP
(WP 0104 00). Reconnect wheel
0048 00-20). Check resistance
sensor wires 4, 5, and YE/GN
between wires 4 and YE/GN.
after checking.
Resistance should be around
2k Ohms. Check resistance
between wires 4 and 5.
Resistance should be 2k to 4k
Ohms.
5. Inspect X167 wiring and a. If continuity is not found at
terminals for damage. Inspect
any
one
wire,
notify
connector X171 for damage.
Sustainment Maintenance to
replace X171 to X167 harness.
BK, and RD between X167 b. Repair or replace damaged
pins 1, 2, and 3 and X171 pins
connectors (WP 0113 00).
0035 00-10