TM 5-3810-306-34
AXLE LOCKOUT CYLINDER ASSEMBLY
Shop Equipment Auto-Maintenance and Repair, FM Suppl No. 1
Tool Outfit Hyd System, Test and Repair, 3/4 Ton Trailer Mtd
SUPPLIES:
EQUIPMENT CONDITIONS: Axle lockout cylinder assembly removed.
DISASSEMBLY:
NOTE
Any
maintenance
requiring
disassembly of cylinder should
include replacement of all cylinder
seals.
1. REMOVE AND DISASSEMBLE PISTON AND ROD
ASSEMBLY (14).
a. Remove setscrew (2) at rod end of cylinder.
WARNING
Do not use air pressure to remove
cylinder rod assembly. Use only a
source of controlled hydraulic oil
pressure if rod assembly is hard to
remove.
Exercise extreme care when handling
or setting down cylinder rod. Do not
damage the chrome surface.
b. Unscrew head (9) and remove cylinder rod
assembly from cylinder barrel (3). Cover barrel
CAUTION
When removing seals and rings,
avoid scratching grooved and gland
surfaces.
13-88