TM 10-3930-641-10
OPERATION UNDER USUAL CONDITIONS - CONTINUED
0005 00
INITIAL ADJUSTMENTS AND DAILY CHECKS - CONTINUED
NOTE
DO NOT start engine at this time.
9.
Turn power switch on right-hand instrument panel to ON and perform panel test:
a.
Press PANEL TEST switch. All indicator lights must illuminate.
PANEL
TEST
SWITCH
422-0040
b.
If all lights do not illuminate, refer to WP 0009 00 to perform troubleshooting.
10.
Release panel test switch and observe indicators. They should indicate as follows:
a.
HIGH FUEL indicator ON. If indicator does not come on, add fuel (WP 0012 00).
b.
NO COOLANT FLOW indicator ON.
c.
LOW ENG OIL indicator OFF. If light is on, add engine oil (WP 0011 00 and WP 0012 00).
d.
LOW HYD oil indicator OFF. If light is on, add oil to hydraulic tank (WP 0011 00 and WP 0012 00).
e.
PLUGGED FILTER indicators all OFF. If indicator on, notify Organizational Maintenance.
f.
HI TEMP HYD OIL indicator OFF. If indicator on, notify Organizational Maintenance.
g.
SUPP STER indicator ON.
h.
LOW PRESS BRAKE indicator flashing ON and OFF.
i.
PARK BRAKE ON indicator ON if parking brake is engaged.
j.
ALTERNATOR INDICATOR ON.
0005 00-3
