TM 10-3930-641-10
PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS) - CONTINUED
0012 00
LOCATION
ITEM TO
CHECK/
NOT FULLY MISSION
ITEM
MAN-
SERVICE
PROCEDURE
CAPABLE IF:
NO.
INTERVAL
HOURS
LEFT SIDE
AND REAR
NOTE
37
After
Overall View
Ensure machine is clean in order to facilitate performance of
PMCS inspections.
a. Check under machine for evidence a. Class III oil, coolant, or
hydraulic oil leaks are evi-
of fluid leakages such as oil, cool-
dent. Any fuel leak is evi-
ant, fuel, or hydraulic oil.
dent.
b. Check machine for obvious dam- b. Damage that would impair
operation is evident.
age to fenders, mirrors, handrails,
ladders, engine covers, and guards.
c. Check for loose wiring or damaged c. Parts are damaged or miss-
lines or hoses.
ing.
d. Check for loose or damaged parts.
d. Parts are damaged or miss-
ing.
a. Check for missing parts or damage a. Parts are missing or dam-
38
After
Front of
to tophandler, hydraulic cylinder,
aged.
Machine
container locks, container lock cyl-
inders, forks, carriage, lift chains,
and mast cylinders.
b. Check condition of windshield, cab
windows, windshield wiper, and
blades.
WARNING
Improperly inflated tires can cause excessive heat buildup resulting in
blowouts. Failure to follow this warning may cause injury to personnel
or damage to equipment.
a. Visually check left-front tire for a. Tire has cuts, abrasions, or
39
After
Left-Front
cuts, abrasions, or bulges in tread or
bulges in tread or sidewall
Wheel and
sidewall area. Check for uneven
area. Other damage that
Tire
wear or underinflation. Look for
would impair operation is
foreign material embedded in tread
evident.
or sidewall area. Remove foreign
material if found.
b. Check for loose or missing lug nuts b. Two or more lug nuts are
or valve stem caps.
missing or valve stem is
damaged.
0012 00-12