TM 10-3930-641-20
(Sheet 2 of 4)
FUEL LINES AND FITTINGS REMOVAL/INSTALLATION (CONT)
REMARKS
ACTION
LOCATION/ITEM
NOTE
REMOVAL
The following procedures apply to any of
the fuel lines and fittings.
Connector nuts are at each end of each hose or tube
Loosen at both ends of fuel line.
1. Connector nuts
assembly.
Remove.
2. Lines/hoses
Elbow nuts hold elbows tight to the base; they are
Loosen.
3. Elbow nuts
screwed in.
Remove.
4. Elbows
Remove where installed.
5. Preformed packings
INSTALLATION
a.
Coat lightly with fuel oil.
1. Preformed packings
b. Install.
Go on to Sheet 3
2-174
