TM 10-3930-641-20
(Sheet 4 of 8)
AIR CLEANER AND DUST EJECTOR SERVICE (CONT)
LOCATION/ITEM
ACTION
REMARKS
Wipe clean with cloth, or wash in water and
8. Body assembly (4)
non-sudsing detergent.
Loosen clamps (7).
a.
9. Dust ejector (6)
Replace if defective.
Remove hose (8).
b.
Remove nuts (10).
c.
d. Remove tube (9).
Clean tube and hose with air (30 psi max.)
e.
or water.
Inspect. If damaged:
10. Gasket (15)
a.
b. Remove capscrews (12) and washers (13).
Remove housing (22).
c.
d. Replace gasket (15).
Clean housing (22) with cloth or wash in
e.
non-sudsing detergent.
Position housing (22) on manifold.
f.
See TORQUE LIMITS CHART, page E-1.
Install capscrews (12) and washers (13).
g.
Go onto Sheet 5
2-201
