TM 10-3930-641-20
FAN DRIVE MECHANISM REMOVAL/INSTALLATION (CONT)
(Sheet 3 of 6)
REMARKS
ACTION
LOCATION/ITEM
Remove
9. Hub assernbly retainer and two cap-
s c r e w s (5)
10. Hub assembly (5)
Remove, holding pulley (7) in position.
NOTE
Use gear puller if required (caution must be
taken not to damage shaft if puller is used).
11. Pulley (7)
Remove.
12. Spacer (8)
Remove from fan drive bracket.
13. Preformed packings, bearings (9),
Remove from hub (5).
spacer (10) and seal (11)
14. Belt tightener
Remove.
See page 2-231.
Go on to Sheet 4
2-238
