TM 10-3930-641-20
(Sheet 2 of 2)
ENGINE OIL PRESSURE SENDING UNIT REMOVAL/INSTALLATION (CONT)
LOCATION/ITEM
ACTION
REMARKS
Locate. Behind engine relay panel and directly
1. Sending unit (3)
above engine oil filler tube.
Disconnect.
2. Terminal (1)
Remove and discard.
3. Sending unit (3)
Remove from sending unit.
4. Elbow fitting (2)
NOTE
Use thread sealant on threads.
Install on engine. Open end up.
1. Elbow fitting (2)
Install on elbow fitting.
2. Sending unit (3)
3. Terminal (1)
Install.
2-265
