TM 10-3930-641-20
(Sheet 2 of 2)
MAIN DISCONNECT SWITCH REMOVAL/INSTALLATION (CONT)
REMARKS
ACTION
LOCATION/ITEM
Disconnect negative (black) cable from battery
at each battery box.
Turn to OFF and remove.
1. Key (1)
Remove after tagging the three cables for
2. Nuts (5), washers (4) and three
location.
cables (6)
Remove.
3. Nut (2) and washer (3)
Remove from the mounting plate.
4. Switch (7)
Position through the mounting plate.
1. Switch (7)
Torque to 20 lb. ft. (27 Nm).
Install and tighten.
2. Washer (3) and nut (2)
Torque to 40 lb. ft. (54 Nm).
Install and tighten.
3. Three cables (6), washers (4) and
nuts (5)
NOTE
Install.
4. Key (1)
Connect negative terminals last.
5. Battery cables
Connect.
TA 098699
End
2-301
