TM 10-3930-641-20
INSTRUMENT PANELS REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION (CONT)
(Sheet 2 of 10)
LOCATION/ITEM
ACTION
REMARKS
NOTE
Follow the same procedure for either instru-
ment panel.
Remove from panel (2) and pull out panel.
1. Four screws (1)
Disconnect at connectors (3). Remove panel.
2. Harness (4)
Remove from capscrew in lower right hand
3. Capacitor
comer behind left instrument panel.
Remove as follows:
1. Fuseholder (7)
a. Disconnect from terminal (5).
a. Two wires (8)
b. Loosen and remove.
b. Nut (6)
NOTE
The slot in the nut must line up with the side
terminal of fuseholder.
c. Fuseholder (7)
c. Remove through front of panel.
2-306
