TM 10-3930-641-20
INSTRUMENT PANELS REMOVAL, DISASSEMBLY, ASSEMBLY, INSTALLATION (CONT)
(Sheet 7 of 10)
LOCATION/ITEM
ACTION
REMARKS
3. Toggle switches (7)
Install as follows:
a. Switch (7)
a. Install from back of panel.
b. Boot (8) and nut
b. Install.
NOTE
The groove in the switch must lineup with the
tab in the panel.
c. Two wires (9)
c. Connect to the terminals.
4. Gages (all) (10)
Install as follows:
a. Gage (10)
a.
Install through front of panel.
b. Retainer (11)
b. Install and fasten to gage with two lock-
washers and two nuts.
c. Wires (12)
c.
Connect.
d. Lamp socket (13)
d. Install in gage.
2-311
