TM 10-3930-641-20
(Sheet 1 of 7)
TIRE REMOVAL/INSTALLATION
This task covers: Replacement of tire with wheel assembly on vehicle.
INITIAL SETUP
Troubleshooting Reference
Materials/Parts
Test Equipment
None.
Tire
None
Wooden blocks
Equipment Condition
Machine parked on hard level ground
(preferably concrete).
Safety link installed on main frames of
machine.
Personnel Required
Special Tools
One mechanic
Sledge hammer
Pry bars
References
General Safety Instructions
Bead breaking tool kit
All air must be released from tire. Check
None
valve stem by running a piece of wire
through it to make sure it is not plugged.
Stand to one side of tire while inflating.
Go on to Sheet 2
Change 1
