TM 10-3930-641-20
(Sheet 3 of 4)
STEERING SYSTEM TESTS ((X-NT)
REMARKS
ACTION
LOCATION/ITEM
NOTE
Perform tests with vehicle on dry, hard
surface and brake OFF.
Turning time from stop to stop must be between 2.6
With engine at high idle, turn from stop to stop
1. Steering wheel
and 3.0 seconds. The difference between right turn
and from each stop to center.
and left turn time must not be more than 0.3 seconds.
Turning time must not increase more than 0.2 seconds
With engine at high idle, push brake pedal and
2. Brakes
from time with brake OFF.
turn steering wheel from stop to stop.
If vehicle steering time does not meet these specifica-
tions, send vehicle to Direct Support Maintenance for
adjustments and repair.
Raise.
3. Carriage
Go on to Sheet 4
2-419