TM 10-3930-641-20
STEERING WHEEL REMOVAL/INSTALLATION (CONT)
(Sheet 2 of 2)
LOCATION/ITEM
ACTION
REMARKS
1. Screws (1)
Remove three from center cover (2) of steering
wheel (4).
2. Cover (2)
Remove.
3. Nut, lockwasher, washer (3)
Remove from steering shaft.
Install steering wheel puller (5) and remove
4. Steering wheel (4)
steering wheel.
1. Steering wheel (4)
Install.
2. Nut, lockwasher, washer (3)
Install. Tighten nut to a torque of 34-40 lb. ft.
(46-54 Nm).
3. Cover (2)
Install.
4. Screw (1)
Install three in cover.
2-416
