TM 10-3930-641-20
(Sheet 5 of 5)
TRANSMISSION CONTROL LINKAGE (CONT)
REMARKS
LOCATION/ITEM
ACTION
Hold rod (10) and install pin (8) into slot
3. Direction control linkage (cent)
g.
in rod. If pin cannot be installed without
moving rod, loosen cam (11) and adjust
yoke (9). Tighten cam (11).
h. Install bracket (7) on threads (4) until it is
even with face of lock group (12).
i.
into holes in lock group (12).
Install seal (6), washer (5), and nut (3).
j.
Tighten nut against bracket.
End
2-411