TM 10-3930-641-20
(Sheet 3 of 5)
TRANSMISSION CONTROL LINKAGE ADJUSTMENT (CONT)
REMARKS
ACTION
LOCATION/ITEM
e. Pull speed selection spool (8) out of case
DIRECTION CONTROL LINKAGE
2. Speed control linkage (cont)
until it does not move.
Hold speed selection spool (8) and install
f.
pin (6) in slot of spool. If pin cannot be
installed without moving spool, loosen nut
(9) to adjust yoke (7). Tighten nut (9).
g.
Install bracket (4) on threads (5). Turn
until it is even with face of transmission
case.
into holes in transmission case.
SPEED CONTROL LINKAGE
Install seal (10), washer (11), and nut (3)
i.
against bracket (4).
TA 098888
Go onto Sheet 4