TM 10-3930-641-20
(Sheet 3 of 5)
TRANSMISSION SERVICE (CONT)
LOCATION/ITEM
ACTION
REMARKS
e. Replace damaged magnets.
2. Magnetic strainer (cont)
f. Replace cover seal if damaged.
g. Install strainer cover and four capscrews.
Check for damage. Replace if necessary.
3. Transmission oil cooler lines (3, 4)
NOTE
4. Transmission oil filter
Place pan under filter housing to prevent spill-
See PMCS, page 2-5.
age.
Remove filter housing drain plug (5).
a.
b. Drain oil.
c.
Remove filter housing (6).
d. Remove and discard filter element (7).
Clean filter housing base (8).
e.
Wash filter housing in clean, non-flamma-
f.
ble solvent.
When using pressure air, wear face shield and
protective clothing to prevent injury. Use 30
psi maximum pressure for cleaning.
2-404
