TM 10-3930-641-20
(Sheet 3 of 3)
HYDRAULIC HAND CONTROL ASSEMBLY REMOVAL/INSTALLATION (CONT)
REMARKS
ACTION
LOCATION/ITEM
INSTALLATION
Install.
1. Handle (4) and cable assembly
Screw onto cable assembly. Tighten, using nut
2. Rod end (10)
(12).
Install on valve assembly using pin (11).
3. Rod end (10)
4. Retainer (8 and 9) and seal
5. Bracket assembly (7)
Slide onto shaft (5).
6. Handle (4)
Install on clevis pin (3).
7. Cotter pin (1) and washer (2)
Adjust. (See page 2-497.)
8. Hydraulic hand control
End
2-504
