TM 10-3930-641-20
(Sheet 2 of 3)
HYDRAULIC HAND CONTROL ASSEMBLY REMOVAL/INSTALLATION (CONT)
REMARKS
ACTION
LOCATION/ITEM
REMOVAL
Remove.
1. Capscrews, washers, three panels
Remove from clevis pin (3).
2. Cotter pin (1) and washer (2)
Remove by sliding off shaft (5).
3. Handle (4)
Loosen at bracket assembly (7).
4. Cable assembly
Remove and save.
5. Retainer (8 & 9) and seal
Remove pin (11) and disconnect at valve
6. Rod end (10)
assembly.
Loosen nut (12) and unscrew rod end (10)
7. Rod end (10)
from cable assembly.
8. Handle (4) and cable assembly
Go on to Sheet 3
2-503