TM 10-3930-641-34-1
GOVERNOR SPECIFICATIONS (CONT)
(Sheet 2 of 2)
(8) Distance from the face of the housing to the end of the bearing for the
governor
control shaft ........................... .998 .005 in. (25.35 + 0.13 mm)
(9) Distance between the bearings for the governor
control shaft ........................ 2.385 +.005 in. (60.58 + 0.13 mm)
(10) Distance from the face of the housing to the end of the bearing for the
governor
control shaft ..................
1.708 + .004 in. (43.38 i 0.10 mm)
(11) Torque for plug .................................. 27 5 lb. ft. (37 7 N-m)
(12) 1S9312 Spring for speed limiter:
Length under test force.................................. .86 in. (21.84 mm)
2.38 + .19 lb. (1.080 + 0.086 kg)
Test force ...............................
Free length after test .................................... 2.62 in. (66.5 mm)
Outside diameter ....................................
.671 in. (17.04 mm)
TA098847
End
2-117