TM 10-3930-641-34-1
SECONDARY FUEL FILTER SPECIFICATIONS
(Sheet 1 of 1)
(1) Distance that stud may extend from base
(measured from sealing surface of base)
to end of stud............................................... .97 .05 in. (24.6 1.3 mm)
(2) Do not damage sealing surface.
(3) Torque for stud (put thread lock
compound on the end of the stud
that goes into the base) .............................. 50 10 lb. ft. (68 14 N-m)
TA098843
2-113
