TM 10-3930-641-34-1
FUEL INJECTION NOZZLE REMOVAL AND INSTALLATION
(Sheet 2 of 4)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1. Plug
Remove from location (2).
2. Timing pin, 5P9697, (A)
Install in location (2) with square end down.
3. Governor control link (3)
Disconnect.
4. Governor control (4)
a. Move to full ON position.
b. Racks are now in center position.
5. Lines from fuel injection pumps (1)
a. Remove.
b. Cap all fuel openings.
c. Remove seals.
TA095992
Go on to Sheet 3
3-33