TM 10-3930-641-34-1
FUEL INJECTION PUMP HOUSING REMOVAL/INSTALLATION (CONT)
(Sheet 5 of 6)
LOCATION/ITEM
ACTION
REMARKS
1. Fuel pump housing (Cont)
f. Install spacers, washers, capscrews (3) and
brackets (2).
2. Fuel shut-off solenoid
Connect wires.
3. Governor control cable (4)
a. Place in position.
b. Install in bracket and tighten nut.
c. Connect to lever (5) with pin (6) and
cotter pin.
4. Fuel ratio control
Install air lines.
5. Fuel lines
a. Install on governor plate.
b. Install support bracket (7).
c. Connect to fuel transfer pump (8).
Go on to Sheet 6
3-45
