TM 10-3930-641-34-1
FUEL INJECTION PUMP DISASSEMBLY/ASSEMBLY
(Sheet 5 of 5)
LOCATION/ITEM
ACTION
REMARKS
ASSEMBLY
Refer to Fuel Injection Pump Installation, page 3-32.
1. Washer (4) and spring (3)
Position on plunger and barrel assembly (5).
2. Check valve assembly (12), spring
Position in bonnet (2).
(11) and collar (10)
3. Bonnet (2) and barrel (7)
Connect with ring (18).
4. Seal
Keep with bonnet for use at installation.
5. Spacer
a. Position in pump housing bore.
b. Correct spacer should be with each pump.
6. Gear segment (9)
Aline gear gap with groove in barrel (7) and
bonnet (2)
End
3-40
