TM 10-3930-641-34-1
FUEL INJECTION PUMP DISASSEMBLY/ASSEMBLY
(sheet 4 of 5)
LOCATION/ITEM
ACTION
REMARKS
CAUTION
Be careful when injection pumps are disas-
sembled. Do not cause damage to surface on
plunger. Plunger and barrel for each pump are
made as set. Do not put plunger of one pump
in barrel of another pump. If one part has
wear then install a complete new pump assem-
bly. Be careful when plunger is put into bore
of barrel.
3. Washer (4) and spring (3)
Remove from barrel (7).
4. Collar (10), spring (11) and valve
Remove from bonnet (2).
assembly (12)
5. Plunger (6)
Separate from barrel assembly (5).
6. Gear segment (9)
Remove from barrel (7).
Go on to Sheet 5
3-39
