TM 10-3930-641-34-1
FUEL RATIO CONTROL DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 4 of 5)
LOCATION/ITEM
ACTION
REMARKS
9. Pin (16)
Remove from valve (17).
10. Retainer assembly (23)
Remove from valve (17).
REASSEMBLY
1. Preformed packing (15)
a. Coat with clean engine oil OE/HDO 30.
b. Install in cover (13) with lip of seal toward
inside of cover.
2. Valve (17)
a. Install in cover (13).
b. Secure with pin (16).
3. Spring (14) and washer (21)
Install.
4. Diaphragm (22)
a. Install on valve assembly (29).
b. Place assembly in cover (13).
5. Cover (11) and gasket (12)
a. Install on diaphragm cover (13).
b. Secure with capscrews (9) and (20) and
washers (10).
Go on to Sheet 5
3-73
