TM 10-3930-641-34-1
STARTER MOTOR DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 2 of 13)
LOCATION/ITEM
ACTION
REMARKS
DISASSEMBLY (MAJOR
COMPONENTS)
1. Housing
Scribe a line across the drive housing, drive
This will allow for the same alignment when
assembly and commutator end frame.
reassembling.
2. Nut and lead (47)
Remove.
3. Screws (26 and 25), drive (27)
Remove.
housing (24) and gasket (37)
4. Inspection plug (34), preformed.
Remove
Mark the screw holes for replacement.
packing (33) and screws (42)
5. Screws (38) washers (40) commutator
Remove
A slight rap from a wood block may be necessary
end frame assembly (43), (20), (44)
to loosen the end frame.
and washer (39)
6. Armature (46)
Remove from the frame
Go on to Sheet 3
3-188