TM 10-3930-641-34-1
ROCKER SHAFT ASSEMBLY - DISASSEMBLY/ASSEMBLY (CONT)
(Sheet 5 of 5)
LOCATION/ITEM
ACTION
REMARKS
4.
Pin (8)
Install until it extends .34 in
(8.6 mm) above
surface of bracket.
NOTE
Be sure pin aligns with marks on tape before
it is driven into shaft.
5.
Tape
Remove.
6.
Rocker arm (15), washers (17),
Install.
retainer (18).
NOTE
Install enough washers to make end play on
each end of shaft .005 - .040 in.
(0.12- 1.01 mm)
End
3-215
