TM 10-3930-641-34-1
CYLINDER HEADS REMOVAL/INSTALLATION (CONT)
(Sheet 2 of 14)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
NOTE
Tag all lines and hoses before disconnecting.
1.
Cooling system
Drain. See TM 10-3930-614-20.
2.
Radiator top tank lines
Remove from each side of the engine.
3.
Water temperature regulator
Remove. See TM 10-3930-641-20.
housings
4
Right hand cylinder head
a
Disconnect heater hose (1) from fitting.
b. Disconnect wire assembly (2) from the
sensor unit.
c.
Disconnect air line (3) from cylinder head.
d. Disconnect fuel lines (4) at fittings.
TA099073
Go on to Sheet 3
3-218
