TM 10-3930-641-34-1
CRANKSHAFT REMOVAL/INSTALLATION (CONT)
(Sheet 2 of 10)
LOCATION/ITEM
ACTION
REMARKS
REMOVAL
1. Bearing caps
a. To insure correct installation later,
check the position of each on the
engine.
NOTE
Each cap is labeled with its number and an
arrow pointing toward the front of the
block.
b. Remove bearing caps Nos. 2, 3 and 4.
2. No. 3 upper bearing thrust plates
Remove.
TA099124
Go on to Sheet 3
3-322