TM 10-3930-641-34-1
FLYWHEEL REMOVAL/INSTALLATION (CONT)
(Sheet 3 of 5)
LOCATION/ITEM
ACTION
REMARKS
5. Lifting arm (2)
Fasten to a hoist and put in position in groove
of flywheel as shown at right.
6. Flywheel (3)
Pull onto bracket (A).
7. Bracket (A)
Remove.
WARNING
To prevent injury, do not let flywheel fall off
lifting arm as it is being removed. Weight of
flywheel is 96 lb. (44 kg.).
8. Flywheel
Remove using lifting arm (2).
9. Ring gear (4)
Lay flywheel (3) flat on a work surface with
the ring gear (4) up. Remove ring gear.
CAUTION
Do not use a torch to remove the ring gear.
TA099121
Go on to Sheet 4
3-317