TM 10-3930-641-34-2
TORQUE CONVERTER REMOVAL (CONT)
(Sheet 5 of 5)
LOCATION/ITEM
ACTION
REMARKS
23.
Hose assembly (13)
Disconnect from torque converter.
24.
Four capscrews
Remove from tube assembly (14) at the engine
cooler.
25.
Clamp (15)
Loosen and move tube assembly (14) away
from torque converter.
26.
Two 1/2-13NC forged eyebolts
Install in cover of torque converter, as shown.
27.
Torque converter
Fasten hoist.
28.
11 capscrews (16)
Remove.
29.
Two capscrews
a. Use as forcing screws to loosen the torque
converter from the flywheel housing.
b. Tighten evenly until torque converter is
loose.
30. Sleeve (18)
Remove lock.
31. Torque converter
a. Pull out of the flywheel housing and make
sure the sleeve at location (18) is free.
b. Remove. Converter is 443 lb. (201 Kg).
TA099234
End
4-11
