TM 10-3930-641-34-2
TRANSMISSION DISASSEMBLY (CONT)
(Sheet 16 of 20)
LOCATION/ITEM
ACTION
REMARKS
54.
Input shaft assembly (with carrier
Set in horizontal position on wood blocks.
and ring gear attached)
55.
Capscrew (6), retainer plate (7) and
Remove from end of input shaft assembly (74).
spacer (8)
56.
Sun gear (9)
Remove from end of input shaft assembly.
57.
Input shaft assembly (74)
a. Attach hoist.
b. Remove from ring gear and carrier.
NOTE
Assembly weighs 62 lb. (28 Kg).
58.
Retaining ring (67)
Remove.
59.
Input shaft assembly (74)
Remove from output shaft (72).
60.
Retaining ring (70), spacer (69)
Remove from input shaft (76).
and bearing (66)
61.
Two seal rings (71) and (73) on
Remove.
output shaft carrier
TA099289
Go on to Sheet 17
4-83
